TEL: +8618992836912
Categories
Exchange

+86 189 9283 6912
+86 29 88767352 
info@north-star-tech.com
2932654651
18992836912
20A, Ruixin Building, No. 25 Gaoxin Road, Xi'an

Knowledge
Home > Knowledge > Content
Steering drilling technology
Jan 10, 2019

The drilling phase:

1. According to the guidance tool points: It can be divided into the slide steering drilling and rotary steering drilling two stages.

Slide steering drilling operations, drilling string does not turn, the drill string with bit sliding forward propulsion.

The problem: 

(1) The drill string torque and friction problem; 

(2) The hole cleaning problems; 

(3) Mechanical drilling rate is slow; 

(4) Bit selection is limited.

Rotary steering operation, the drill string with drill bit rotation. Hole cleaning is good, but resistance moment, drilling torque can lead to the lower part of the torsional vibration of the drill string, and large investment.


2. According to the guide way points, can be divided into geometric steering drilling and geosteering drilling two stages.

Geometric orientation: 

Thedownhole MWD tool to measure the geometric parameters: the hole deviation and azimuth and tool numerical control system to below, by the control system in a timely manner to correct and control the well track.

Geosteering: 

With geometric orientation ability at the same time, can also according to logging while drilling (LWD) geological parameters have been measured, the real-time control of borehole trajectory, bit along the formation of the optimal position to move forward.

continuous-north-seeking-gyro


  • Exchange

    +86 189 9283 6912
    +86 29 88767352 
    info@north-star-tech.com
    2932654651
    18992836912
    20A, Ruixin Building, No. 25 Gaoxin Road, Xi'an

  • Categories
  • Copyright © Xi'an North Star M&C Tech. Co.,Ltd All Rights Reserved.